Contact Us:
561-320-8560

  • Home /
  • Search results for: 'impregnated core bits'

Search results for 'impregnated core bits'

Items 1 to 10 of 38 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Ascending Direction
  1. Supreme-Plus Wet Concrete Core Bits, Premium, 14" Tube Length

    Supreme-Plus Wet Concrete Core Bits, Premium, 14" Tube Length, 10.0mm - 1/2" - 14" Diameter

    Starting at: $52.27

    APPLICATION
    For use with Concrete, Brick, Block, Masonry and Stone Learn More
  2. Electroplated Granite Diamond Blade - 4" - 7"

    Electroplated Granite Diamond Blade - 4" - 7"

    Starting at: $22.00

    FEATURES
    This professional quality blade is designed for fast cutting of Marble and Similar Materials.Electroplating Technology keeps all diamond particles attached to segment plate and sore without such assisting aggregates such as copper and steel thus making this product a Chip-Free cutting item. Exposed diamond particles gives 100% surface to surface contact. Diamonds on core provide a clean "All Through" Cut. An economic alternative to impregnated segmented blades.
    APPLICATION
    Blade intended for Granite and Similar Materials. Learn More
  3. Electroplated Marble Diamond Blade - 4" - 7"

    Electroplated Marble Diamond Blade - 4" - 7"

    Starting at: $24.20

    FEATURES
    This professional quality blade is designed for fast cutting of Marble and Similar Materials.Electroplating Technology keeps all diamond particles attached to segment plate and sore without such assisting aggregates such as copper and steel thus making this product a Chip-Free cutting item. Exposed diamond particles gives 100% surface to surface contact. Diamonds on core provide a clean "All Through" Cut. An economic alternative to impregnated segmented blades.
    APPLICATION
    Blade intended for Marble and Similar Materials. Learn More
  4. Laser Welded Stone Dry/Wet Core Bits with 4" Tube Length

    Laser Welded Stone Dry/Wet Core Bits with 4" Tube Length - 1-1/4" - 1-3/8" - Max 12,000 RPM

    Starting at: $59.40

    FEATURES
    For dry / wet cutting. 4" tube length with laser-welded individual segments to hold up under extreme heat and cutting pressure.. Specially formulated supreme quality segments provide smooth and clean cutting in granite, marble, stone, tile, porcelain and similar materials. Full range of sizes for virtually any job. Use on core drilling machines and hand-held drills.
    APPLICATION
    Core Bit intended for Granite, Marble, Porcelain, Artificial and Natural Stone.
    Max RPM 12,000 Use dry or wet. Learn More
  5. Stone Wet Core Bits with 4" Tube Length

    Supreme - Stone Wet Core Bits with 4" Tube Length - 3/16" - 2-1/2" Diameter - Max 12,000 RPM

    Starting at: $35.64

    FEATURES
    For wet cutting only. 4" tube length with individual segment height of 8mm. Specially formulated supreme quality segments provide smooth and clean cutting in granite, marble, stone, tile, porcelain and similar materials. Full range of sizes for virtually any job. Use on core drilling machines and hand-held drills.
    APPLICATION
    Core Bit intended for Granite, Marble, Porcelain, Artificial and Natural Stone.
    Max RPM 3,500 Use wet only. Learn More
  6. Stone Wet Core Bits with 4" Tube Length

    Premium - Stone Wet Core Bits with 4" Tube Length - 1" - 2 1/2" Diameter - Max 3,500 RPM

    Starting at: $30.80

    FEATURES
    For wet cutting only. 4" tube length with individual segment height of 8mm. Specially formulated premium quality segments provide smooth and clean cutting in granite, marble, stone, tile, porcelain and similar materials. Full range of sizes for virtually any job. Use on core drilling machines and hand-held drills.
    APPLICATION
    Core Bit intended for Granite, Marble, Porcelain, Artificial and Natural Stone.
    Max RPM 3,500 Use wet only. Learn More
  7. Laser Welded Dry/Wet Core Bits with 9" Tube Length

    Laser Welded Dry/Wet Core Bits with 9" Tube Length - 1" - 6" Diameter

    Starting at: $44.00

    FEATURES
    For wet / dry cutting. 9" tube length with laser-welded individual segments to hold up under extreme heat and cutting pressure. Barrel vents increase air flow to dissipate heat and cool the core bit. Specially formulated professional quality segments provide fast cutting and long life in a variety of materials including concrete, reinforced concrete, brick, block and masonry. Full range of sizes for virtually any job. Use on core drilling machines and hand-held drills.
    APPLICATION
    Core Bit intended for Concrete with light to moderate reinforcement, Masonry, Block and Brick. Use dry or wet. Learn More
  8. Premium Wet Concrete Core Bits with 14" Tube Length - 1/2" - 14" Diameter

    Premium Wet Concrete Core Bits with 14" Tube Length - 1/2" - 14" Diameter

    Starting at: $43.56

    APPLICATION
    For use with Concrete, Brick, Block, Masonry and Stone Learn More
  9. Laser Welded Ductile Iron Blades - Supreme (Diamond Blades)

    Laser Welded Ductile Iron Diamond Blade - Supreme - 12" - 14"

    Starting at: $129.00

    FEATURES
    This laser welded ductile iron blade is design exclusively to cut very dense and abrasive ductile iron-an iron carbon silicon-alloy commonly used to mark water and sewage pipe. The blade sides are impregnated with silicon carbide electroplated on the core in a swirl pattern, ideal for beveling and eliminates pinching and heat build up.
    APPLICATION
    Blade intended for Ductile Iron Pipe, Cast Iron Pipe, Ridged Concrete Pipe, Concrete and Cured Concrete. Learn More
  10. Supreme-plus Wet Segmented Pinted Concrete Core Bits, Premium, 14" Tube Length

    Supreme-plus Wet Segmented Pinted Concrete Core Bits - Premium - 14" Tube Length - 10.0mm - 12" (51mm)

    $869.00 As low as: $782.10

    APPLICATION
    Core Bit intended for Concrete with light to moderate reinforcement, Masonry, Block and Brick. Use wet only.
    TESTING RESULT
    We have test this core bit by drill into a 12" thick test slab of 5,000 psi cure concrete with four 5/8" rebar placed in the line of a cut. An rpm of 800 was used during this test. The time to drill a hole that include the rebar was 5 minutes and 15 second. Without the rebar was 3 minutes and 45 seconds.
    Learn More

Items 1 to 10 of 38 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

List  Grid 

Set Ascending Direction

Shopping Options

Category
  1. Diamond Saw Blades (19)
  2. Diamond Core Bits (12)
  3. Granite & Marble (12)
Shank Size
  1. 3/8" (1)
Diameter
  1. 1" (6)
  2. 1-1/2" (6)
  3. 1-1/4" (7)
  4. 1-1/8" (5)
  5. 1-3/4" (6)
  6. 1-3/8" (7)
  7. 1/2" (3)
  8. 1/4" (1)
  9. 10" (4)
  10. 12" (13)
  11. 12" (51mm) (1)
  12. 14" (16)
  13. 16" (7)
  14. 18" (5)
  15. 2" (6)
  16. 2" (51mm) (1)
  17. 2-1/2" (5)
  18. 2-1/4" (3)
  19. 20" (5)
  20. 24" (4)
  21. 26" (3)
  22. 3" (4)
  23. 3-1/2" (3)
  24. 3/16" (1)
  25. 3/4" (3)
  26. 3/8" (1)
  27. 30" (3)
  28. 36" (3)
  29. 4" (8)
  30. 4-1/2" (9)
  31. 5" (9)
  32. 5/16" (1)
  33. 5/8" (3)
  34. 6" (4)
  35. 7" (8)
  36. 7/8" (1)
  37. 8" (4)
  38. 9" (2)
Grade
  1. Premium (2)
  2. Professional (2)
  3. Supreme (1)
  4. Supreme Plus (3)
Rim Style
  1. Segmented (14)
  2. Turbo (2)
  3. Turbo Segmented (6)
Weld Type
  1. Laser (14)
Bond
  1. Hard (1)
  2. Medium (1)
  3. Medium-Soft (2)
  4. Soft (4)
Material To Be Cut
  1. 911 Fire Rescue (1)
  2. Artificial Stone (4)
  3. Asphalt (4)
  4. Auto Body Panels (1)
  5. Block (9)
  6. Brick (9)
  7. Bullet-Proof Glass (1)
  8. Cast Iron Pipe (1)
  9. Ceramic Tiles (1)
  10. Concrete (10)
  11. Concrete Pavers (1)
  12. Concrete Pipe (1)
  13. Concrete Slate (1)
  14. Copper (1)
  15. Cured Concrete (2)
  16. Demolition (1)
  17. Drywall (1)
  18. Ductile Iron (1)
  19. Fiberglass (1)
  20. Fire Doors (1)
  21. Granite (11)
  22. Green Concrete (4)
  23. Hard Block (1)
  24. Hard Brick (1)
  25. Hard Stone (1)
  26. Light Duty Cured Concrete (1)
  27. Light to Moderate Reinforced Concrete (3)
  28. Marble (9)
  29. Masonry (9)
  30. Metal Roofs (1)
  31. Natural Stone (4)
  32. Pavers (1)
  33. Plastic (1)
  34. Porcelain (5)
  35. PVC (1)
  36. Quarry Tiles (1)
  37. Railroad Rail (1)
  38. Rebar (1)
  39. Reinforced Concrete (2)
  40. Ridged Concrete Pipe (1)
  41. Roof Tile (1)
  42. Sandstone (1)
  43. Steel Studs (2)
  44. Stone (8)
  45. Tile (1)
  46. Wood (1)
Tool Use
  1. Angle Grinder (6)
  2. Block Saw (9)
  3. Brick Saw (7)
  4. Bridge Rail Gantry Saw (5)
  5. Chop Saw (2)
  6. Circular Saw (4)
  7. Core Drill Rig (10)
  8. Hand Held Core Drill (10)
  9. High Speed Cut Off Saw (4)
  10. Tile Saw (6)
  11. 65 HP Walk Behind Saw (3)
Arbor Hole
  1. 1", 50/60mm (1)
  2. 1"-20mm (11)
  3. 1"-20mm, 20mm (2)
  4. 1-1/4"-7 (3)
  5. 1-1/4"-8 (1)
  6. 5/8" (1)
  7. 5/8"-11 (7)
  8. 50/60mm (4)
  9. 7/8"-20mm-5/8" (5)
  10. 7/8"-5/8" (3)
  11. DM-7/8"-5/8" (4)
Segment Height
  1. 10mm (18)
  2. 12mm (1)
  3. 15mm (2)
  4. 18mm (1)
  5. 20mm (1)
  6. 3-/4mm (1)
  7. 6/7mm (1)
  8. 8mm (1)
  9. Crown Sag. (1)
Segment Width
  1. .065" (1)
  2. .075" (1)
  3. .080" (1)
  4. .085" (2)
  5. .090" (3)
  6. .100" (2)
  7. .110" (2)
  8. .125" (10)
  9. .140" (4)
  10. .165" (4)
  11. .187" (3)
  12. .250" (1)
  13. 3.0mm (4)
  14. 3.2mm (2)
  15. 3.3mm (2)
  16. 3.5mm (7)
  17. 3.6mm (3)
  18. 3.8mm (4)
  19. 4.0mm (3)
  20. 4.2mm (4)
  21. 4.5mm (2)
  22. 4.6mm (1)
  23. 5.0mm (2)
  24. 5.5mm (3)
  25. Crown Seg. (1)
Horsepower Rating
  1. Up To 13 HP (7)
  2. Up To 65 HP (3)
Wet/Dry
  1. Wet or Dry (17)
  2. Wet (12)
My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

© 2011 Precision Diamond, Inc . All Rights Reserved.